Waring MBB Blender User Manual


 
HOW TO DISASSEMBLE & CLEAN
CONTAINERS WITH REMOVABLE BLADES
1. Be sure the switch is in the off position.
2. Remove the container assembly from the unit base and
empty the contents.
3. To disassemble the Waring Blender container assembly,
turn container collar clockwise.
4. The glass container, container collar and blade
assembly are dishwasher safe. The plastic container,
lid, measuring cup lid insert and gasket must be
washed by hand. Allow all parts to air dry, and
reassemble for next use.
5. When assembling container after cleaning, be certain
all components are in the proper position.
6. It is particularly important to place the container gasket
between the blade assembly and the container.
7. Wash and rinse container prior to initial use, and
immediately after each use.
HOW TO CLEAN CONTAINERS WITH
NONREMOVABLE BLADES
1. Remove the container from the unit base. Remove the
lid. Add a cup of cleaning solution, made by adding a
few drops of dishwashing detergent to 1 cup of cool
water, to the container. Scrub and flush out the interior
of the container and the lid to dislodge and remove as
much residue as possible. Empty the container.
2. Add more cleaning solution. Put lid on container, place
container on unit base, and run on high speed for
two minutes.
6