Filter
Top Products
5
MARTINI MAKER OPERATION
1. Before rst use, wash cocktail shaker with soap and
warm water. Rinse well and dry.
2. Place on at surface and plug into electrical outlet.
3. Push the power ON/OFF button.
4. Push the release button located behind cocktail shaker
holder (diagram, part #4) to raise the top of the unit.
5. The unit is now ready to insert or remove the
cocktail shaker.
6. It is best to have the shaker chilled.
7. Remove the strainer from the stainless steel
cocktail shaker.
8. Add ice cubes into the shaker up to the max ice ll line.
9. Add your favorite martini recipe.
10. Replace the strainer and insert the shaker into the
cocktail shaker holder.
11. Lower the top of the unit until it locks into place.
12. Push the appropriate button – shake or stir.
13. When the unit beeps, push the release button and
the top lid of the unit will rise.
14. Remove the shaker from the unit.
15. Remove the cap from the strainer top.
16. Dispense the perfect martini into your chilled
martini glasses.