Filter
Top Products
loading the refrigerator (see Using the Refrigerator
Efficiently, Different Storage Zones section).
Brief Temperature Variation
Brief temperature variation may occur when the
freezer door is open during loading. These varia-
tions will not affect the food and the temperature
will quickly return to its preset value.
Display Brightness Adjustment
There are 3 different options to adjust the bright-
ness of the display;
* 1.8 minimum brightness
* 2.8 medium brightness
* 3.8 maximum brightness (default setting)
To adjust:
Note: It is recommended to start the quick freeze
function for at least 2 hours before loading the
freezer.
Option “24” Hours
“24” will appear on the display.
Option “48” Hours
“48” will appear on the display.
Quick Cooling
This function is recommended when loading the
refrigerator with a large quantity of food.
The compressor runs continuously until the refriger-
ator compartment’s temperature drops down to 1
o
C
after which the super cooling function is automati-
cally disabled and the normal compressor run cycle
resume to restore the latest set temperature.
button (5) together to activate the function
“SC” will appear on the display and the
blue light will appear.
It is still possible to view the refrigerator compart-
ment current temperature by pressing the
To disable the quick cooling function manually:
button (5) together again.
Cooling Fan
This function allows maintaining the same tempera-
ture on all levels of the refrigerator chamber.
It is switched ON and OFF by pressing the
button (12).
The yellow light (13) is turned on when the function
is activated.
When the cooling fan is not switched on, the natu-
ral circulation of air within the refrigerator chamber
will cause different temperature zones. This is
caused by the cold air sinking to the lowest section
of the chamber. This should be kept in mind when
Press and hold the
press the
button (10) and
button (6) once.
CFL
FREEZE
Press and hold the
press the
button (10) and
button (6) twice.
CFL
CFL
Press the
button (8).
button (10) and the
CFL
COOL
Press the
button (10) and
CFL
COOL
FREEZE
Press and hold the
Press the
button (8) to decrease brightness.
button (9) to increase and the
button (10)
Alarm and Error Codes
Error
Codes
Type Description
E1 Temperature sensor
fault in refrigerator
chamber
Sensor has been
damaged. Call a quali-
fied technician. The
built-in emergency
program will maintain
an adequate tempera-
ture until the fault has
been removed.
E2 Temperature
sensor fault in
freezer chamber
E4 Door open The freezer door has
been open for more
than 2 minutes
E5 Temperature in the
freezer chamber is
too high
The temperature
inside the chamber is
exceeding
Interrupting The Alarm
The alarm can be interrupted by opening and clos-
ing one of the doors or by pressing any button on
the control panel for 7-8 seconds.
In case of error E1/E2, the alarm can only be
stopped when the damaged sensor has been
changed.
9