Waterford Precision Cycles Freestanding 70 Freezer User Manual


 
USING THE REFRIGERATOR / FREEZER
The appliance has been setup with a default tem-
perature of +5
o
C in the refrigerator chamber and -
18
o
C in the freezer chamber for optimum operation.
It is possible to change and save the setting in the
electronic control memory (see temperature setting
section). The latest temperature setting will be kept
in memory in case of a power failure.
The electronic control has been equipped with the
following functions:
* ON/OFF switch function.
* Display to the real temperature inside the freez-
er chamber.
* Setting the temperature in both the refrigerator
and freezer chambers.
* Automatic defrosting of the refrigerator chamber
* Quick freezing.
* Quick Cooling.
* Cooling fan.
* Adjustment of the display contrast.
* Alarms and error codes.
* Visual indication of functions that are switched
on with the use of LED’s.
Switching ON and OFF
Before using for the first time, clean the inside of the
appliance and the accessories with warm water and
a little washing up liquid and dry with a soft cloth.
Before connecting to the mains, let the appliance
stand for at least 2 hours to ensure correct function-
ing.
Start the refrigerator by pressing the upper ON/OFF
After approximately 5 seconds, the green light (3)
will come on.
Start the freezer by pressing the lower ON/OFF
After approximately 5 seconds, the blue light (4) will
come on.
If the appliance is not used for a long period of time:
* Switch the freezer off by pressing the
buttons (1), (2) and unplug the appliance.
* Empty the refrigerator and freezer chamber.
* Clean and dry the refrigerator and freezer
chamber.
* Leave both doors slightly open to prevent the
chambers from getting unpleasant smells.
button (2).
8
button (1).
Temperature
The temperature values shown on the display are
averages.
The appliance has a built in sensor which detects
the changes of temperature in the room and will
automatically cause the compressor to adjust the
running time to maintain the set temperature.
Display The Temperature
temperature in the refrigerator compartment.
temperature in the freezer compartment.
Temperature Setting
It is possible to modify the temperature in both the
refrigerator and freezer compartment.
Refrigerator
The temperature can be set between +2
o
C and
+9
o
C.
The current temperature will be displayed.
temperature.
temperature
Quick Freezing
Fresh food should be frozen as quickly as possible.
This way the nutritional value of the food, its vitamin
content, appearance and taste are not impaired.
The longer the freezing time, the greater the water
loss from the food cells will be. This causes them
to shrink which will result in poor water re-absorp-
tion when defrosted. If the food is frozen quickly,
the cells have less time to loose moisture, shrink-
age is minimised and water re-absorption is
increased during defrosting. This will maintain the
quality of the food.
The quick freezing function lowers the temperature
to freeze food quickly thus maintaining its quality.
There is an option of 2 quick freezing time period,
“24” and “48” hours.
Press the
button (9) to display the actual
Press the
Press and hold the
Press the
button (9) to raise the
button (8) to display the actual
Press the
button (8) to lower the
COOL
button (5).