Filter
Top Products
-- 5 --
NOTE: Make sure threaded joints (tubes
and nozzle) are securely tightened.
5. Align the tube assembly in a vertical
position.
6. Thread extension tube assembly
onto the end of the pivot tube.
Nozzle
Extension
Tubes
Pivot
Tube
Elbow
OPERATION
KNOW YOUR GUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT
. Compare illustrations to your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Nozzle
Decal
Extension Tube
Pivot Tube
Elbow with Spacer Ring
Adapter for
Gas Units with
Mounting Tabs
Goggles
Adapter for
Electric Units
with Tube
Release Button
Adapter for
Electric Units
with Mounting Tabs
STARTING INSTRUCTIONS
WARNING:
You
MUST
make sure
the tubesare s ecure before u sing theunit.
Do not use the unit without all of the tubes
properly attached to avoid flying debris
and/or impeller contact which can cause
serious injury. Alwayswear eyep rotection
to prevent rocks or debris from being
blown or ricocheting into the eyes and
face w hich can result in blindness o r seri-
ous injury.
WARNING:
Hold the unit as illus -
trated when starting (for gas units only).
Do not set unit on any surface except a
clean, hard area when starting and/or
using the unit. Debris such as gravel,
sand, dust, grass, etc could be picked
up by the air intake and thrown out
through the discharge opening, damag-
ing the unit or property, or causing seri-
ous injury to bystanders or the operator.
NOTE: When starting unit, lean the top of
gutter attachment agai nst awall, tree, etc.,
for support.
STARTING
POSITION
(for gasunits only)
D
Follow the
STARTING INSTRUCTIONS
in your instruction manual.
D
Support the gutter attachment with
one hand as soon as the engine or
motor starts.
SUPPORT
THE TUBES
OPERATING TIPS
D
Wear eye protection to guard against
eye injury.