Filter
Top Products
Using the Timer to Make Bread
1 Select the type of bread to be baked with the SELECT
button.
Note: Do not use the program timer when making bread containing
ingredients that can easily spoil, such as egg, milk, vegetables
and grains such as oatmeal etc.
2 Check the present time on the display.
3 Press the TIMER SET button.
(Check to make sure the timer display lights up.)
4 Set the hour and minute for the time you want the baking
to be finished.
(Follow the same procedure as that used for setting the time of
day.)
Note: The program timer can only be adjusted in 10-minute incre-
ments.
5 Press the TIMER SET button again. The beep sound is
heard and the timer lamp lights up, indicating program-
ming is completed. The bread will now be perfectly done
at the programmed time.
(If you made a mistake during setting or want to change the
programmed time, or should a long beep error sound be heard,
press the CLEAR/STOP button and start again from step 3.)
6 After programming is completed, the clock display returns
to indicate the current time of day. Pressing the TIMER
SET button will display the programmed time for 3 sec-
onds. Pressing the 'start' button during bread making
process will display baking completion time for a few
seconds.
MENU
If the present
time is 10:00pm ..
4
For example...
Program timer cannot be set for
(4 hours, 20 minutes)
Time for which the program timer may be set
Time of Day 11 12
10
00pm
123456
2:20am
789 Next morning
9:50am
5