Filter
Top Products
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 4
AGENCY LISTING INFORMATION 5
INSTALLATION 5
ANSUL® INSTALLATION & SETUP 8
OPERATION 11
CLEANING INSTRUCTIONS 12
MAINTENANCE INSTRUCTIONS 14
MAINTENANCE LOG 15
MSDS for Ansulex® Low pH 16
TROUBLESHOOTING SUGGESTIONS 18
PARTS & SERVICE 19
CUSTOMER SERVICE DATA 19
Thank You for purchasing this Wells Manufacturing Co. appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that
it gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for
the appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
ELECTRICAL SPECIFICATIONS
DIMENSIONS
1
MODEL VOLTS WATTS AMPS
WFAE-30F
WVPE-30F
208 1ø 9,000 43.3
240 1ø 9,000 37.5
208 3ø 9,000 25.0 (L1, L2, L3)
240 3ø 9,000 22.0 (L1, L2, L3)
WVAE-30F EU
WVPE-30F EU
308-415V 9,300
15.0 (L1)
13.0 (L2 & L3) 3 (N)
WVAE-55F
WVAE-55FS
208 3ø 17,000 47.8 (L1, L2, L3)
240 3ø 17,000 41.0 (L1, L2, L3)
WVAE-55F EU
WVAE-55FS EU
380-415V 17,400
26.0 (L1)
24.0 (L2 & L3) 3 (N)
MODEL WIDE DEEP HIGH
ALL
15.8” (402 mm)
20” (508 mm) including
manual pull station
43.7”
(1110 mm)
76.4”
(1941 mm)
INTRODUCTION
M381 301603 OpM (Supplemental) NFPA Hood