Filter
Top Products
FEATURES & OPERATING CONTROLS (continued)
3
v.7
FUSIBLE LINK LOCATION FUSIBLE LINKS provide fire protection by melting at a pre-set temperature
and activating the fire suppression system.
v.8
FIRE SUPPRESSION
NOZZLE(S)
Disperse the fire suppression media.
f.9
FILTER PUMP MOTOR
OVERLOAD RESET
Provides over-temperature protection for the FILTER PUMP MOTOR.
Reset manually by pressing the red button.
v.10
VENTILATOR EXHAUST
COLLAR
Ventilator discharge. DO NOT BLOCK.
Contains fire damper with pre-installed 285ºF (141ºC) fusible link.
v.11
v.12
v.13
CHARCOAL FILTER
HEPA AIR FILTER
GREASE BAFFLE
See page 10.
v.14
ANSUL® SYSTEM STATUS
INDICATOR
Indicates status of Ansul® fire suppression system
(i.e. COCKED or FIRED).
v.15
ACCESS TO AUTOLIFT
MOTOR
On fryers with automatic basket lifting device (WVAE-series) allows
servicing of lift mechanism.
v.16
MANUAL PULL STATION Allows manual discharge of fire suppression system. Shown on left side,
may also be mounted on right side. IMPORTANT: PULL STATION must
be field installed by an ANSUL® technician.
v.17
GREASE CUP Catches drippings from GREASE BAFFLE.
f.18
DRIP PAN Catches any liquid draining from top of fryer section.
f.19
STABILIZER Prevents unit from tipping backwards.
f.20
RIGID (REAR) CASTERS Allows unit to be easily positioned by slightly lifting front of unit.
IMPORTANT
If a remote pull station is installed, both rear casters must be replaced with fixed legs in order to deter movement of
unit. MOVING AN APPLIANCE EQUIPPED WITH A REMOTE PULL STATION WILL DISCHARGE THE FIRE
SUPPRESSION SYSTEM.
f.21
FIXED (FRONT) LEGS Allows the unit to be leveled.
f.1
POWER SWITCH
(FILTER-OFF-FRYER)
FRYER position energizes VENTILATOR POWER LIGHT and BLOWER.
If, within 10 seconds, there is sufficient airflow for proper operation,
POWER LIGHT will remain ON and fryer will operate.
v.2
VENTILATOR POWER LIGHT
(green)
Glows when FRYER POWER SWITCH in pressed to FRYER and adequate
airflow has been proven.
v.3
CHECK FILTERS LIGHT
(amber)
Glows when GREASE BAFFLE and/or HEPA FILTER are not properly
installed. When this light is lit, fryer is disabled.
v.4
REPLACE FILTERS LIGHT
(amber)
Glows if either CHARCOAL FILTER or HEPA FILTER are due for
replacement. Fryer will continue to operate, but filters must be changed in
a timely manner before they clog and disable the fryer.
v.5
SERVICE REQUIRED LIGHT
(red)
Glows when there is insufficient airflow for proper operation (either
CHARCOAL FILTER or HEPA FILTER, or both, plugged). When this light
is lit, fryer is disabled.
v.6
VENTILATOR BLOWER Provides ventilation airflow.
ITEM DESCRIPTION FUNCTION
M381 301603 OpM (Supplemental) NFPA Hood