West Bend TEMPR Toaster User Manual


 
6
Toaster Only Function:
1. Place the appliance on a clean, dry, at surface.
2. Place an English mufn, bagel, bread, or croissant into one or both sets of the
toasting slots.
3. Select the desired level of darkness by adjusting the browning control dial(s).
4. Plug the appliance into a 120 volt, AC electrical outlet only.
5. Push the “TOAST” button on the touchpad. The “TOAST” button will ash blue,
indicating the function is selected.
6. Press one or both of the carriage levers down until they lock into position. The
“TOAST” button will be illuminated solid blue to indicate the toasting cycle is in
operation. Note: The carriage lever(s) will not stay down if the appliance is not
plugged into an electrical outlet.
7. Upon reaching the pre-selected browning level of toast, the toast will
automatically “pop up” and the “TOAST” light will turn off.
8. To remove the toast from the toasting slots, push up on the carriage lever.
Note: Toasted food can be hot. Handle with care when taking toasted food out
of the toasting slots.
9. Unplug the appliance from the electrical outlet after each use.
The Cancel Function: Press the corresponding “CANCEL” button(s) to stop the
toasting cycle(s) before it is nished. Do not pull up on the carriage lever to stop the
toasting process as this may damage the appliance. The “CANCEL ALL” button
found in the center of the control panel will stop both toasting cycles.