Filter
Top Products
18
USAGE
Using the 60 minute ringer timer
To set the timer:
1. Turn the knob clockwise to the required number of
minutes. When the time has elapsed the timer will
give a short ring.
NOTE: For times below 20 minutes, turn the knob past
20 minutes and then back to the required number of minutes.
Using the 2 hour cut-off timer
Manual operation
The timer needs to be set at the “O” marker so that the oven
can be used manually.
Automatic operation
The 2 hour timer features an automatic oven “cut off”.
This means that a cooking period of up to 120 minutes
can be set.
1. Set the Oven Temperature Control Knob to the
required temperature.
2. Turn the cut-off timer clockwise to the required number
of minutes. For timer settings of less than 20 minutes,
turn the knob past 20 minutes and then back to the
required number of minutes. (Purpose – to set audible
ringer.)
3. When the timer returns to “Auto Off”, the timer gives
a short ring and the oven will be switched off.
4. The oven will not operate again until you turn the timer
back to the “O” marker.
NOTE: It is not recommended to use this timer for short
duration, e.g. boiling eggs.
TIMER
OVEN TIMER
WARNING
• The Clock MUST be set to operate oven.
General features
Your 3 button programmable timer has the following features:
• Timer – your 3 button programmable timer allows you
to set a countdown time that will beep when the set
time has elapsed.
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
• End cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time, beep
when the finish time has been reached and turn the
oven off.
• Delayed start cooking time – You can combine the
cooking duration and cooking end time to switch the
oven on and off at a specific time during the day.
NOTE: Your 3 button programmable timer only operates
with your oven.
Change the time of day (Daylight saving)
1. Press the “mode” button until the “clock” indicator
begins flashing.
2. Press the – or + buttons to change the time. 5 seconds
after the last change, the “clock” indicator will
disappear, confirming the time has been set.
Setting the timer
1. Press the “mode“ button until the “timer” indicator
begins flashing.
2. Set the countdown time you want by using the – and +
buttons. 5 seconds after the last change the “timer” indicator
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press any button.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Set the oven to the desired temperature. The oven
indicator light will glow and the oven will come on.
3. Press the “mode“ button until the “cook time” indicator
begins flashing.
4. Set the cooking duration you want by using the – or
+ buttons. 5 seconds after the last change, the “cook
time” indicator will stop flashing, and the time of day
will be displayed.
NOTE: Do not forget to add preheating time if necessary.
USING THE TIMER AND CLOCK OPERATING THE PROGRAMMABLE CLOCK
WMAN_540 Upright_Jun11.indd 18 28/06/11 12:07 PM