Whirlpool 2180911 Ice Maker User Manual


 
4 Check that the circuit breaker is not
If the ice maker
does not operate:
tripped or the house fuse is intact
and tight.
4 Check that the power supply cord is
plugged into the wall receptacle.
4 Check that the water line is turned on.
4 See the Use and Care Guide
troubleshooting list.
Wiring diagram
Electrical Shock Hazard
Disconnect ice maker from electrical
supply before servicing ice maker.
Failure to follow this instruction could
result in death or serious injury.
This appliance operates at 115 volts;
except for the cutter grid circuit, which
operates at 8.5 volts at 1 amp.
The compressor will remain running until
the bin thermostat becomes satisfied
and opens up. This de-energizes all the
system except for the transformer and
cutter grid.
Part No. 2180911
0 1995
If you have questions about operating,
cleaning or maintaining your ice maker:
4 Refer to the Use and Care Guide.
If you need
4 Call the dealer from whom you
assistance:
purchased this ice maker. The dealer
is listed in the Yellow Pages of your
telephone directory under
“Appliances - Household - Major -
Service and Repair. I
If you need service:
Maintain the quality built into your ice
maker by calling an authorized service
company.
To obtain the name and telephone
number of an authorized service
company:
4 Contact the dealer from whom you
purchased your ice maker; or
4 Look in the Yellow Pages of your
telephone directory under
“Appliances - Household - Major -
Service and Repair.”
When you call, you will need:
4 The ice maker model number.
4 The ice maker serial number.
Both numbers can be found on the
model/serial rating plate located
behind the bin door on the frame.
A 15- or 20-ampere time-delay fuse or circuit
breaker is recommended.
NOTE: Contacts are shown in freezing cycle.
r
------------------------
*
1
BK BLACK
W
WHITE
Y
YELLOW
OR
ORANGE
BK/W BLACK/WHITE TRACER
G/Y
GREEN/YELLOW TRACER
Note: Door switch
and bin light not
used on all models.
Printed in U.S.A.