Filter
Top Products
Adjusting the crisper cover track
(on some models)
For your convenience, one crisper is larger than the
other, and your crisper cover has an adjustable track
so you can switch positions of the crispers. This allows
you to store celery and other longer items in a crisper.
You can adjust the cover track with the cover in the
refrigerator by removing the crispers and the cover
insert.
To remove the center track:
1. Push up cover insert from bottom, then slide out with
both hands.
2. Gently pull up on front end of track.
3. Pull rear end of track out of opening in cover.
To replace the center track:
1. Inset-t rear end of track (with hole) into opening
in cover.
2. Lower front end of track into slot.
3. Make sure rear end of track snaps into place on
underside of cover.
Adjusting the freezer shelf
(on some models)
Adjust the freezer shelf to match the way you use your
freezer.
To remove the shelf:
1. Lift entire shelf slightly.
2. Move shelf all the way to one side.
3. Tilt other side up and out of shelf support cups.
4. Pull shelf up and out.
To replace the shelf:
1. Tilt the shelf and insert into freezer compartment.
2. Insert one end of the shelf all the way into the center
of the shelf support cups.
3. Lower other end of shelf and insert into the shelf
support cups.
4. Lower shelf into place.
NOTE: The shelf should lower slightly and lock into
place. If the shelf does not appear sturdy, make sure
both ends of the shelf are inserted into the shelf
support cups.
10