Filter
Top Products
Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
For Serbs 400,800, and 810 models:
Turn Cycle Control Knob to desired cycle.
For Series 830 models: Press
POTS
&
PANS button for
that
cycle. Or press either HEAT
DRY or AIR DRY for NORMAL WASH and LIGHT WASH cycles. Press AIR DRY for RINSE
8 HOLD cycle. Turn Cycle Control Knob to desired cycle.
For
Serfes 840
models:
Press a cycle pad, then turn the Cycle Control Knob to desired
cycle. NORMAL WASH, LIGHT WASH, and RINSE & HOLD all share the same cycle pad.
NOTE: Your model may have all or some
of
the cycles shown.
NORMAL WAS
soiled loads. (The Energy
Guide label is based on this
RINSE & HOLD
oneorrnore
l
Do not use detergent.
l
Use AIR DRY option.
‘C