Filter
Top Products
A %” shows what each cycle includes
CYCLE
MAIN
FINAL TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY (Minutes
Normal
Iii
Double wash for normal,
everyday soiled loads.
(The Energy Guide label is .
l t
. Ott .
. .
66’
based on this cycle.)
. Select HIGH TEMP
WASH to heat water in the main
wash (martcedt).
l
The water heats to 140°F (60°C) in
the final rinse (marked n) unless
you select LOW ENERGY RINSE.
H-W
iiiiii
Double wash for cleaning
heavily soiled loads.
l
Select HIGH TEMP
WASH to heat water in
l l
l
t ’
l
tt
l
76’
the main wash (markedt).
l
The water heats to 140°F (60%) in
the final rinse (marked n) unless
you select LOW ENERGY RINSE.
Pots-N-Pans
liiiiii
Double wash for maximum
cleaning of cooked-on or
. .
baked-on foods.
l
The water heats to
at
.
et
0
l w .
.
76’
140°F (60%) in both
washes (marked t).
l
The water heats to 140°F (60°C) in
the final rinse (marked t+) unless
you select LOW ENERGY RINSE.
‘Cycle time indudes dry time and may be longer depending on the temperature of water entering the dishwasher.
Tha cooler the water, the bnger lhe cyde lime. If the water is already hot enough, UN cyde times will be as shown.
Using CANCEIJDRAIN
Press CANCEL/DRAIN to cancel a cycle or
clear option selections.
To cancel a cycle:
l
Press CANCEL/DRAIN while the dish-
washer is running to start a P-minute drain.
It will take a few seconds for the drain to
start. If desired, select a new cycle. (See
“Changing a cycle or an option setting” on
page 14.)
continued on next page
13