Filter
Top Products
l
You can press CANCEL/DRAIN again to
stop the drain immediately. Remember to
drain the dishwasher again before starting
a new cycle.
To clear the indicators:
Press CANCEL/DRAIN before starting the
dishwasher to clear all cycle and option
selections.
NOTE: A small amount of water remaining
in the dishwasher is normal.
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press AIR DRY any time
before the DRYING indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the CANCEU
DRAIN pad is pressed.
HIGH TEMP WASH
When HIGH TEMP WASH is selected, the
B
dishwasher heats the water during
the main wash of the CHINA/
CRYSTAL, LOW ENERGY,
NORMAL, and HEAVY cycles.
Heating the water helps improve
washing results. The POTS-N-PANS cycle
automatically uses HIGH TEMP WASH.
LOW ENERGY RINSE
When LOW ENERGY RINSE is selected
the dishwasher does not heat the
water during the final rinse of
CHINA/CRYSTAL, LOW
ENERGY, NORMAL, HEAVY,
and POTS-N-PANS cycles.
NOTE: LOW ENERGY RINSE saves
energy, but dishes take longer to dry and
some spotting can occur. For best rinsing
and drying results, use a liquid rinse agent.
AIR DRY
When AIR DRY is selected, the air in the
iii!
dishwasher is not heated during
the “dr)r portion of a cycle. Using
option
setting
. ,.
AIR DRY helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel dry-
ing. For best drying, use a liquid rinse agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the “d’dry”
portion of the cycle unless you select AIR
DRY.
Changing a cycle or an
During the first minute
of a cycle
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
After the first minute
of a cycle
1. Press CANCEUDRAIN. A P-minute drain 3. If desired, press one or more Option pad(s).
cycle starts. Wait for drain cycle to finish.
4. Check the detergent dispensers. They
2. Press a new Cycle pad. must be filled properly for the new cycle.
14