Filter
Top Products
The dishes were not
loaded correctly.
See notes in " Load ing the Dishwasher Baskets ".
Select a more intens ive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the item s so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the S pray
Arms".
r
Use less detergent if you have so ft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refil l the rinse-ai d
dispenser.
Do not e mpty your dishwasher immedi ately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only o n ce t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents w ater f orm dropping off
dishes in the upper basket.
In short program the washing temperat ure is lower.
This also lowers cle aning performance. Choose
a program with a long washing time.
Water drainage is more d ifficult with t h ese items.
Cutlery or dishes of this t ype are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not enough deter gent
was dispensed.
Items are blocking
the path of spray arms.
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fit t ed.
This may cause
the s p ay arm jets
to get blocked.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed agai nst
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too s oon
Wrong program
has bee n selected
Use o f cutlery with
a low-quality coating
20
Uns a ti s
-factory
was hin g
res u lt
Uns a ti s
-factory
dry i ng
res u lt