Whirlpool AKZ 561 Oven User Manual


 
EN10
STARTING THE OVEN - SETTING THE LANGUAGE
At the first switch on of the oven, display shows ENGLISH. Turn the “Browse” knob until the desired
language is displayed then press the button to confirm.
SETTING THE CURRENT TIME
After setting the language, the current time must be set. The two hour digits flash on the display.
1. Turn the “Browse” knob to display the correct hour.
2. Press the button to confirm; the two minute digits flash on the display.
3. Turn the “Browse” knob to display the correct minutes.
4. Press button to confirm.
To change the current time, for example following a power outage, see the next section (SETTINGS).
SELECTING COOKING FUNCTIONS
1. Turn the “Functions” knob to the required function: the cooking settings appear on the display.
2. If the parameters shown are those required, press . To modify them, proceed as indicated below.
SETTING THE TEMPERATURE/GRILL POWER
To modify the temperature or grill power, proceed as follows:
1. Turn the “Browse” knob to display the required value.
2. Press the button to confirm.
RAPID PREHEATING
1. Turn the “Functions” knob to the symbol to select the rapid preheating function.
2. Confirm by pressing : the settings appear on the display.
3. If the proposed temperature is that required, press the button . To modify it, proceed as described
in the previous sections. The message PRE appears on the display. When the set temperature is
reached, it will be replaced by the relevant value (e.g. 200°C) and an acoustic signal sounds. At the
end of preheating, the oven automatically selects the conventional function .
The food can now be placed in the oven for cooking.
4. To set a different cooking function, turn the “Functions” knob and select the required function.
3
3
3
3
3
3
3