Filter
Top Products
EN11
SETTING THE COOKING DURATION
Use this function to cook food for a set time, from a minimum of 1 minute to the maximum time allowed
by the selected function, after which the oven switches off automatically.
1. Once the temperature is confirmed, the symbol flashes.
2. Turn the Adjustment knob to display the required cooking time.
3. To confirm the cooking time, press the button .
SETTING THE COOKING END TIME/DELAYED START
IMPORTANT:Delayed start setting is not available for the following functions: FAST PREHEATING,
BREAD/PIZZA.
N.B.:With this setting, the selected temperature is reached in a more gradual way, therefore
cooking times will be slightly longer than those given in the cooking table.
The required cooking end time can be set, delaying oven activation by up to a maximum of 23 hours and
59 minutes, starting from the current time. This is possible only after a cooking duration has been set.
After setting the cooking duration, the display shows the cooking end time (e.g. 15:45) and the symbol
flashes.
To delay the end of cooking, postponing oven activation, proceed as follows:
1. Turn the “Browse” knob to display the required time cooking is to end (e.g. 16:00).
2. Confirm the selected value by pressing button : the two dots of cooking end time flash, indicating
that the setting has been made correctly.
3. The oven will automatically delay the start in order to end cooking at the set time.
TIMER
This function can be used only with the oven switched off and is useful, for example, for controlling the
cooking time of pasta. The maximum time that can be set is 23 hours and 59 minutes.
1. With the “Functions” knob on zero, turn the “Browse” knob to display the required time.
2. Press the button to start the countdown. When the set time has elapsed, the display shows “END”
and an acoustic signal sounds. To silence it, press the button (the current time appears on the
display).
SELECTING SPECIAL FUNCTIONS
Turn the “Functions” knob to the symbol to access a submenu containing four special functions.
To browse, select and start one of these functions, proceed as follows:
1. Turn the “Functions” knob to the symbol : the display shows “DEFROST” and the symbol
associated with this function.
2. Turn the “Browse” knob to scroll the list of functions: DEFROST, KEEP WARM, RISING, ECO FORCED AIR.
3. Press the button to confirm.
3
3
3
3
3