Filter
Top Products
EN13
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at pag. 14.
To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:
1. Turn the “Functions” knob to symbol : the word PYRO appears on the display.
2. Press button to confirm your choice and start the pyro-cleaning cycle.
To select ECO pyro-cleaning, turn the “Browse” knob: the word ECO appears bottom right on the display. Press button to start
the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol appears on the display. The door remains locked
at the end of the cleaning cycle: “COOL” appears on the display, indicating the oven is still cooling down. When the oven cools
to a safe temperature, the symbol switches off and the display shows “END”.
NOTE: the automatic door lock control procedure fails to execute properly, the symbol appears on the display. If, on the
other hand, the door remains closed due to a fault in the locking system, and “DOOR LATCHED” appear on the display. In this
case, contact the After-sales Service.
3
3