Filter
Top Products
Drain Hose and Check Valve
The drain hose of your dishwasher is equipped with a factory-installed check valve. If removal of the drain
hose is necessary, follow these instructions for reassembly.
Pump
Housing
(3) Drain
(4) Drain Port
(1) Check Valve
1
‘i&90’
FLOOR
1. Push the Check Valve (1) onto the Pump
Housing
Drain Port (4) making sure the letters “TOP” are
showing on top. This position locates the valve
such that the slit end is perpendicular to the floor.
I
I
(4) Drain Port
2. Push the Drain Hose (3) and Clamp (2)
assembly over the Drain Port (4) and Check Valve
(1). Fasten the Clamp (2) securely.
;,:
'1‘
,'4 \
.,
/
/I /
I
11