Filter
Top Products
Instructions for Changing Color in Front
Panel Pack
For Models
SO
Equipped
Remove Side Trim
NOTE: Either side trrn may be removed to
change color in the Front Panel Pack.
STEEP 1. Remove the tb’:o screlvs that fasten the
side trlrn to the door frarrle. See Figure 9.
STEEP 2. Open the door <Ibout half way, then slide
the trim downward until the upper edqe is free of
the console or end cap (about l/4”)
STEEP 3. Next lift off the <lde trinl.
Change Front Panel
STEP 4. Slide the panels sideways until they are
clear of the groove in the underside of the console
and the lower trim strip of the door. See Figure 9.
NOTE: There is a corrugated (cardboard)
spacer behind the panels that should be left
in
place.
STEEP 5. Select the color
VOLJ
wash to have showing.
INSERT SIDE
TRIM BOTTOM
FIRST
Reinstall Panel Pack
and Side Rims
STEP 6. Position the panels so that upper edge of
the panels fits into the groove on the underside of
the console, and the lower edge of the panels fit
into the lower door trim. See Figure 9.
STEP 7. Slide the panels back into place, making
sure the cardboard spacer is in place in the door
assembly.
It may be necessary to gently push on the surface
of the panels so they will fit under the edge of the
side trim that is still in place. See Figure 10.
STEP 8. Slide the lower end (with cutout) of the
side trim downward until the upper edge will fit
under the lower edge of the console end cap. Next
slide the side trim upward until it is secure. See Fi-
gure 10. Make sure the panels are in place before
installing the side trim.
STEP 9. Posrtron the side trim so the two moun
ting holes in the side trim align with mounting
holes in the door frame.
STEP 10. Install the two mounting screws in the
side trim.
5