Filter
Top Products
CLEAN SdNAL LIGHT
cwx CONTROL KNOB
The AIR DRY Option
Air in the dishwasher is automatically heated
during the “dry” part of all cycles
If the AIR DRY Option is selected, air In the
dishwasher is not heated Using this option helps
save energy. but dishes take longerto dry (over-
night] and some water spotting may result
Some items (such as plastics] may need towel
drying.
For best results, use a liquid rinse aid such as
Jet-Dry. R
HI-TEMP WASHING Option
When this option is selected, water for the
parts of the cycle will be longer if the water is
main wash and the final rinse is heated to145 F heated. HI-TEMP washing is automatic in POTS &
(63 C). Washing and rinsing action in those
PANS.
Using DELAY START
1. Push desired Cycle Selector Button.
2. Push desired Option Selector Buttons.
3. Turn Control Knob clockwlse to the number of
hours (1 or 2 hours] you want the dishwasher to
delay before the selected cycle starts.
4. Close and latch the door.
NOTES:
l
You can add items while time is counting
down. Close and latch the door. The timer will
not advance if the door is unlatched.
l
RINSE & HOLD and LOW ENERGY WASH Cycles
can’t be delayed.
To add a dish after starting
1. To be sure the added Item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LOW ENERGY WASH.
2. Unlatch the doorto stop the cycle.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30 sec-
onds for air in the dishwasher to warm up.
This helps reduce the amount of moisture
that can come from the vent when restat-t-
ing the cycle.
5. Latch the door. The dishwasher will start
from where it stopped.
Changing a setting
You can change a setting anytime during
3. Be sure the detergent dispensers are filled
any cycle.
properly for the new cycle.
1. Press in the door latch to unlatch the door
4. Close and latch the door, The dishwasher will
and stop the cycle.
automatically start the new cycle.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
The CLEAN Signal Light
The CLEAN Signal Light
will
come on when a
washing cycle
IS
complete
To turn it off. Turn the Control Knob clockwise
slightly until the light goes off.