Filter
Top Products
Before starting your dishwasher -
1. Read “Important Safety Instructions” on
page 2 before starting your dishwasher.
2. Spin the Upper Spray Arm to make sure
nothing will stop it from turning freely.
3. Push door firmly when closing and it will
automatically latch.
4. Run hot water at sink nearest dishwasher
until it is hot. Turn it off.
CYCLE SELECTOR BUTTONS
Starting your dishwasher
OPTION SELECTOR BUTTONS
1. Push a Cycle Selector Button for the desired
- POTS & PANS and HEAVY WASH Cycles
cycle.
share the same spot on the dial, CHINA
2. Push Option Selector Button for desired option
CRYSTAL and LOW ENERGY WASH Cycles
or options. (Use AIR DRY for RINSE & HOLD
also share a spot on the dial. The Cycle
Cycle.]
Selector Button determines which cycle
3. Turn Cycle Control Knob clockwise to point to
operates.
a desired cycle. You will feel a definite stop at
The dishwasher will automatically start the
each cycle mark.
selected cycle.
NOTE: Options may be changed or cancelled
by pushing the Option Selector Button(s)
again.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63°C) in both
washes and the last rinse [marked ‘1.
Cycle time will be about 11/2 to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 75
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 65 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 60
minutes.