Filter
Top Products
Selecting an option
Options can be selected by touching the SELECT OPTION pad. Each
touch of the pad advances the display to the next option. There are
three options available: AIR DRY, HEAT DRY and HI TEMPAII optionscan
m
be changed any time the display is on, including during a program.
When the RINSE program is selected, options are not available. When
POTS & PANS or CHINA program is selected, only HEAT DRY and AIR
DRY options are available.
AIR DRY
The AIR DRY option helps save energy, but the
dishes take longer to dry (overnight). Some water
spotting may result. Some items (such as plastics)
may need towel drying. For best results, use a liq-
uid rinse aid such as Jet-Dry”
HEAT DRY
When HEAT DRY is selected, the air in the dish-
washer is heated during the “dry” portion of any
program - except RINSE.
HI TEMP
When HI TEMP is selected, the water for the main
wash and final rinse is heated to 145 F (63 C). POTS
& PANS has the HI TEMP option pre-programmed
into it. HI TEMP can not be selected with RINSE or
CHINA programs
A Dry Option will show in the display with HI TEMP
Be sure to select the desired Dry Option (HEAT DRY
or AIR DRY) in combination with HI TEMP
l
Touch SELECT OPTION pad until HI TEMP indicators
are shown in the display.
l
Option indicators will show in the display if they
cannot be selected with a program; RINSE, POTS
& PANS or CHINA.
l
You can change an option while the program
IS
running by touching the SELECT OPTION pad.
Using PROGRAM MEMORY
The use of PROGRAM MEMORY lets you store the
complete dishwashing program that you most fre-
quently use.
To set PROGRAM MEMORY for the first time:
1. Touch PROGRAM MEMORY pad once. The PRO-
GRAM Indicator will show on the display.
2. Select the dishwashing Program, Options and
Delay Hours. This is done by touching the SELECT
PROGRAM, SELECT OPTION and DELAY pads.
3. Touch PROGRAM MEMORY pad a second
time. This enters the selected Program, Options
and Delay Hours into the dishwasher’s memory.
NOTE: Each step must be completed within
15 seconds. If not completed in 15 seconds,
the display will go blank.
To start the dishwasher using PROGRAM
MEMORY:
l
Touch START. The dishwasher will immediately
start If Delay Hours are in the Program Memory,
the dishwasher will start the delay count down.
To change the dishwashing program in PRO-
GRAM MEMORY:
1. Touch PROGRAM MEMORY pad once. The dis-
play will show the set Program, Options and
Delay Hours (if selected).
2. Touch in the new Program, Options and/or De-
lay Hours you want. NOTE: If you want to cancel
Delay Hours, the hours must be advanced to
the blank that comes after the 9.
3. Touch PROGRAM MEMORY pad a second
time. This enters the selected Program, Options
and Delay Hours into the dishwasher’s memory,
NOTE: Each step must be completed within IS
seconds. If not completed in 15 seconds, the
old Program, Options and Delay Hours will re-
main as they were.
In case of a power interruption or failure:
The PROGRAM MEMORY will be erased. Reset the
‘ROGRAM MEMORY for the Program, Option and
Ielay Hours you want.
10