Filter
Top Products
Cleaning and Caring
Continued
Cleaning the condenser
Personal Injury and
Product Damage Hazard
l
Be sure the ice maker is OFF and discon-
nected from the main power supply. Unit
could suddenly start if not disconnected.
Condenser fan rotation, sharp condenser
fins and hot tubing could cause personal
injury.
l
Condenser fins can bend easily. Use care
when vacuuming the condenser to keep
from bending the fins.
4. Remove dirt and lint from the condenser fins
and the unit compartment with a brush attach-
ment attached to a vacuum cleaner.
5. Replace the lower access panel and screws.
The top of the access panel needs to be
secured under the two metal tabs before
replacing the screws.
6. Plug unit in and turn the Cycle Control Knob to
“ON .”