Filter
Top Products
Using your
refrigerator
FREEZER CO/NTROL REFRIGERATOR ;ONTROL
EXTERIOR M&T”RE CONTROL
LIGHT SWITCH
1.
2.
Setting the controls...
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
Set the REFRIGERA-
TOR CONTROL To 3.
Set the FREEZER
CONTROL TO B.
Give the refrigerator time to cool down com-
pletely before adding food.
(This may take sev-
eral hours.)
These settings should be about right for nor-
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
firm.
Changing the control settings...
l
Adjust the Refrigerator Control first.
If you need to adjust temperatures in refrigerator
l
Wait at least 24 hours between adjustments.
or freezer, use the settings listed in the chart below.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
If Refrigerator
Door opened often
Refrigerator
4
Section is
Large amount of food added
Freezer
A
TOO WARM Room temperature too warm
If Freezer
Door opened often
Section is
Refrigerator
3
Large amount of food added
Freezer
C
TOO WARM
Very cold room temperature
QUESTIONS?
(can’t cycle often enough]
. ..call your
If Refrigerator
COOL-LINE’ Section is
Controls not set correctly
Refrigerator
2
service
for your conditions
Freezer
B
TOO COLD
assistance
telephone
If ICE isn’t
Heavy ice usage
MADE FAST ENOUGH
Refrigerator
number
Very cold room temperature Freezer
:
(page 16).
(can’t cycle often enough)
If BOTH SECTIONS Door opened often
4
are TOO WARM
Refrigerator
Large amount of food added
Freezer
B
Very warm or very cold
room temperatures
Exterior Moisture Control
The
Exterior Moisture Control
on the Control
COnSOk Opt?KYkS
electric
heaters around the
I. Use the “OFF” setting when humidity is low.
door openings. These heaters help keep moisture
2. Use the “ON”
setting
if moisture forms on the out-
from forming on the outside of the refrigerator,
side of the refrigerator.
5