Whirlpool ED25SM Refrigerator User Manual


 
-,
Removing freezer shelves. . .
l
Lift front sliahtlv.
l
Lift back
05
supports
l
Replace in reverse order.
Lift the Front
Then the Back
Removing the freezer basket...
For proper air movement, keep the freezer basket
In place when the refrigerator IS operatrng
To remove the basket:
l
Slrde out to the stop
l
Lift the front to clear
the stop
l
Slrde out the rest
of the way
-
To replace
%
the basket:
l
Place basket on the slrdes
l
Make sure the wrre stops
clear the front of theslrdes
l
Slide basket tn
~I.
I.sEx_ ..r. NJ* L ‘.._/
“. 5 ,. .I~.~U,S, ? :, ~.a,&” c** ,>T iii*e.az,_.rlL
Removing the crisper, meat pan
and covers.. .
l
Slrde crisper and meat pan straight out to stop
l
Lrft the front.
l
Slide the rest of the way out
l
Replace in reverse order.
Push the lab
to Clear the Cover.
Snap Back into Place.
l
Covers are held In place by two pegs at the back
and two notched tabs In front
- Press front tabs out of the way
-Lift cover front.
-Lift back off the pegs
- Replace in reverse order
Changing light bulbs.. .
Before removing a light shreld for cleaning or for
replacing a bulb, unplug the refrigerator. Use op-
phmce bulbs only
Pull on
Pull Out at
light bulbs behind refrigerate; and freezer
control consoles:
- Pull control knob straight off.
-
Pull bottom of control panel straight out.
-Lift top of panel off supports.
- Replace with a 40.watt appliance bulb.
- Replace panel In reverse order.
l
light bulb behind ice maker:
- Remove the Ice bin (see ice maker rnstructions
page6).
- Replace with a 40.watt appliance bulb.
-Replace Ice bin
l
Dispenser light:
- Reach the bulb through the dispenser area.
-
Replace with a heavy-duty IO-watt bulb.
a.<,.. **“WY-,- e*- ,, 1 r,-..*.. LY,-.a.l~-.J es.~.~.T -5
Removing the base grille...
l
Open the doors
l
Pull grille outwards as shown
l
Do not remove Tech sheet fastened behind grille.
To replace:
l
Line up grille support tabs with metal clips.
l
Push firmly to snap into place
l
Close the doors.