Filter
Top Products
Removing the Roll-Out Shelf...
Removing the crisper, meat pan
and covers...
l
Slide crisper ana meat pan straight @ut 1:: s[op
l
Lift the front
l
Slide the rest of Ihe way out
o Replace In reverse order
l
Zove;s ore helC ,n place by two pegs 01 the back
and tbo notepied tabs IV front
Roll Out the Shelf
Lift Out the Troy
Tilt the Front;
Lift the Back
The troy rests on a frame
thct
slides out for
easy loodlng or unloading It should be the bottom
shelf In your orrongement
The troy lifts out of the frame The frame Itself
IS
removed ond replaced just llke rhe shelves
Removing freezer shelves.. .
l
Lift front slightly
l
Lift bock off supports
l
Replace In reverse order
Lilt the Front
Removing the freezer basket.. .
For prorxx 01’ movement keep the freezer boskeT
r zxace uhler’ the refrlgerotcr 15 operatlrlg
To remove the basket:
l
Slide out tc Ibe 900
l
Place basket on the sllues
l
Make sure the wre stops
clear the frorlt of tDe sildes
l
Slide bcsket IT\
10
l
Lift Ihe frort to clear
l
Slide out ti?e res!
=
of the \niov
To replace
the basket:
Push the lab
to Clear the Cover
Snap Back Into Place
~ Press front tabs out of the way
~- Lift cover front
~ Lift back ofi the pegs
-~ Replace IP reverse order
Changing right bulbs...
Before removing o light shield for cleonipg or fof
replacing a bulb
unpiug the refrigerator. Use
op
oilonce 0uibs onii
Pull Off the Dial
Pull Out at the Bot
Light bulbs behind retrigerator and treezer
control consoles:
- Pull control knob straight off
- Pull bottom of control panel straight out
- Lift top of panel off supports
-
Replace with a 40.watt appliance bulb
- Replace panel In reverse order
l
light bulb behind ice maker:
- Remove the Ice bin [see ice maker instructions
page 8 1
- Replace with a 40.watt appliance bulb
- Replace Ice bin
l
light bulb above crisper:
-
Pull top of the light shield away from the back
WOll
- Lift shield off base supports
-
Replace with o 40-watt appliance bulb
- Replace shield In reverse order
l
Dispenser light:
- Reach the bulb through the dispenser area
-
Replace with CI heavy-duty IO-watt bulb