Filter
Top Products
Caring for your range
Control Panel and Knobs
1. Pull knobs straight off
2. Use warm soapy water and a sofl cloth, or spray glass cleaner, to wipe the
control panel. Rinse and wipe dry.
3. Wash control knobs in warm soapy water. Rinse well and dry.
4. Push control knobs straight back on. Make sure they point to OFF.
Surface Units and Reflector Bowls
Removing
3. Pull the surface unit straight away
from the receptacle.
2. Lift the edge of the unit, opposite
the receptacle, just enough to
clear the element hold down clip
and the reflector bowl.
1. Lift out the reflector bowl. See
“Cleaning Chart” on page 15 for
cleaning instructions.
II