Filter
Top Products
OVEN TEMPERATURE OVEN
SURFACE UNIT
CONTROL SELECTOR
INDICATOR
OVEN SIGNi
RIGHT REAR RIGHT FRONT
LIGHT
CONTROL KNOB
CONTROL KNOB
Using your range
Using the Surface Units
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a guide. For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI to start
Use MED-HI
Use MED
Use MED-LO
foods cook-
to hold a
for gravy,
ing; to bring
to keep food
rapid boil; to
puddings
liquids to a
cooking after
fry chicken
and icing; to
boil.
starting it
or pancakes. cook large
on a higher
amounts of
setting.
vegetables.
CAUTION: The use of the HI setting for long periods of time
can damage surface units and discolor chrome reflector
bowls. Start cooking on HI and turn control down to con-
tinue cooklng.
Use LO to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
within the LO
band to keep
food at the
temperature
you want.
5