Filter
Top Products
15
Preheating
Style 1 - Electronic Oven Control
After START is pressed, the oven will enter a timed preheat
conditioning. “Lo” will appear on the display until the temperature
is above 170ºF (75ºC). Once 170ºF (75ºC) is reached, the display
temperature will increase in 2° increments as the actual
temperature of the oven increases. “PREHEATING” will appear in
the display in the lower text line. When the preheat conditioning
temperature is reached, a tone will sound, and the selected
temperature will appear on the display.
Styles 2 & 3 - Electronic Oven Controls
After START is pressed, the oven will enter a timed preheat
conditioning. “PrE” and the time countdown will appear on the
display (on some models). When the preheat conditioning time
ends, a tone will sound and the selected temperature will appear
on the display.
Preheat temperatures are affected by varying factors such as
room temperature and peak energy usage times. It is normal for
the temperature showing on the display and the actual oven
temperature to differ.
Waiting an additional 10 minutes after the preheat conditioning
time ends to put food in the oven is suggested when baking
foods with leavening ingredients, such as yeast, baking powder,
baking soda and eggs.
Choice Bake
®
Function
(on some models)
The CHOICE BAKE
®
function minimizes the top heat during oven
cooking. It is ideal for baking pies, casseroles and breads, and for
roasting foods that require longer and slower cook times such as
poultry and roasts.
Similar to the baking and roasting function, the bake elements or
burners cycle on and off at intervals during the CHOICE BAKE
®
cycle. However, the cycle duration for the broil element is much
shorter during CHOICE BAKE
®
cycle, allowing less top browning
of foods and more customized control for your baking results.
To Use:
1. Press CHOICE BAKE
®
function.
Press the TEMP “up” or “down” arrow pads to set a
temperature other than 350°F (175°C) in 5° increments.
The bake range can be set between 170°F and 500°F
(75°C and 260°C).
2. Press START.
The temperature can be changed after this step by pressing
the TEMP “up” or “down” arrow pads and then pressing
START.
3. Press OFF/CANCEL when finished cooking.
To use the CHOICE BAKE
®
function during a regular Bake cycle
to acheive less top browning, press CHOICE BAKE
®
cycle, set
the desired temperature and press START.
Broiling
Broiling uses direct radiant heat to cook food. Changing the
temperature when Custom Broiling allows more precise control
when cooking. The lower the temperature, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broiling temperatures.
■ For best results, use a broiler pan and grid (provided on some
models). It is designed to drain juices and help avoid spatter
and smoke.
If your model does not have a broiler pan, one may be
ordered. See “Assistance or Service” section to order. Ask for
Part Number 4396923.
■ For proper draining, do not cover the grid with foil. The
bottom of the pan may be lined with aluminum foil for easier
cleaning.
■ Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to avoid curling.
■ Pull out oven rack to stop position before turning or removing
food. Use tongs to turn food to avoid the loss of juices. Very
thin cuts of fish, poultry or meat may not need to be turned.
■ After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
Before broiling, position rack according to the Broiling Chart. It is
not necessary to preheat the oven before putting food in unless
recommended in the recipe. Position food on grid in the broiler
pan, then place it in the center of the oven rack. Close the door to
the broil stop position to ensure proper broiling temperature.
To Broil:
1. Open door to broil stop position.
2. Press BROIL.
3. Press START.
4. Press OFF/CANCEL when finished.