Filter
Top Products
Using Your Refrigerator
Setting the controls
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in
for the first time:
REFRIGERATOR
4 WARMER 0 COOLER b
1. Set the Refrigerator Control to 3.
2. Set the Freezer Control to B.
Give the refrigerator time to cool down com-
pletely before adding food. (This may take
several hours.)
These settings should be right for normal
household refrigerator usage.
The controls will be set about right when milk
or juice is as cold as you like and when ice
cream is firm.
Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 14.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
If Refrigerator Door opened often
Section is
Large amount of food added
TOO WARM Room temperature too warm
Refrigerator
Freezer
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Refrigerator
Freezer
If Refrigerator
Section is
TOO COLD
Controls not set correctly
for your conditions
Refrigerator 2
Freezer
B
If ICE isn’t
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 3
Freezer
A
Refrigerator 4
Freezer
B
5