Filter
Top Products
Lift the front.
Removing the crispers and crisper cover
To remove the crispers:
1. Slide crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove the crispers.
2. Lift the front and remove the cover support.
3. Pull cover up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower front into place.
3. Replace cover support with long tab toward
front.
NOTE: If the support needs adjustment, turn
base clockwise to lower or counter-clockwise
to raise.
4. Replace crispers.
Changing the light bulb
then the back
Slide out to the stop, lift
the front and slide out
the rest of the way
Electrical Shock Hazard
Before removing light bulb, either unplug
the refrigerator or disconnect the electric-
ity leading to the refrigerator at the main
power supply. Failure to do so could result
in electrical shock or personal injury.
To change the refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind Control Console to find bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with
one of the same size and shape.
Reversing the door swing
You can change the hinges on your refrigerator
so the doors open the other way. Refer to the
instruction sheet included with your refrigerator.
Ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.