Filter
Top Products
Using Your Refrigerator
Contmued
EXTERIOR MOISTURE CONTROL
4 OFF 0 ON k
Slide out to the stop,
lifl the front and slide
out the rest of the way
Guide stop q--y
Shelf guide
then the back
Pull out to the
stop, lift the
front and pull again
Exterior moisture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the
door openings. These heaters help keep
moisture from forming on the outside of the
refrigerator.
1. Use the OFF setting when humidity is
low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
To remove the shelf:
1. Remove items from shelf.
2. Slide shelf straight out to the stop.
3. Lift the front.
4. Slide shelf out the rest of the way.
To replace the shelf:
1. Fit back of shelf on top of guide with wire
stops on the bottom of guide.
2. Lift the front.
3. Slide shelf in until it clears all stops.
Moving the meat pan and cover
The meat pan and cover can be removed for
cleaning or moved to another shelf, if desired.
Remove the meat pan first.
To remove the meat pan:
1. Slide the pan out to the stop.
2. Lift the front.
3. Slide pan out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1, Remove meat pan.
2. Tilt cover up at front.
3. Pull up and out.
To replace the cover:
1. Fit bottom notches of cover over rear and
center cross bars of shelf.
2. Lower cover into place.
3. Replace meat pan.
6