Filter
Top Products
Install properly.. .
1 Allow %” (.2 cm] space on each side and at top for
ease of Installation.
2 The refrigerator bock can be flush against the
Wd
3 If the refrrgerator IS to beagarnst a wall, you might
want to leave enough space so the door can be
obened wrder
Level refrigerator-freezer.. .
Right to Raise;
Left to Lower
I. Remove base grille [see page 8)
2. To raise front, turn each screw to the right
3. To lower front, turn each screw to the left.
4. Check with level.
Remove sales labels.. .
Remove the Consumer Buy Guide label and other
inside labels before using the refrigerator Any glue
left can be taken off wrth rubbrng alcohol
Do not remove the label giving operating in-
structions for the Refrigerator and Freezer
COn-
trols or the Tech Sheet fastened under the
refrigerator at the front.
Clean it.. .
I
Clean your refrrgerator before using It. See clean
rng InstructIons on page 8
Plug it in...
3-prong
grounding type
wall receptacle
Refrigerator
Power Cord
RECOMMENDEDGROUNDING METHOD
A 115 Volt, 60 Hz, AC only, 15 or 20 ampere fused
electrical supply is requrred It IS recommended that
CI separate circurt serving only this appliance
be provided.
Do not use an extensron cord. Use a receptacle
which cannot be turned off with a switch or pull
chain. See individual electrrcal requirements and
grounding instruction sheet In your literature
package
4