Filter
Top Products
Adjusting shelves.. .
Shelves can be adjusted to match the way you use
your refrrgerator Glass shelves are strong enough to
hold bottles, milk and other heavy food Items.
To remove glass shelves:
1 Tilt up at front
2. Lrft up at back
3. Pull shelf strarght out.
G/OS sheives ore
heavy Be corefui
To replace:
1. Guide the rear hooks Into the slots in the shelf
supports.
2. Tilt up front of shelf untrl hooks drop Into slot. Lower
front of shelf to level positron
To remove door shelf:
l
Lift up and out
To replace:
l
Insert hooks Into guides
on both sides.
l
Push down
Removing the freezer shelf...
l
Lift front slrghtly.
l
Lift back off supports.
l
Replace in reverse order.
Lift the Front
Then the Back
Adjusting crisper
Humidity Control.. .
You can control the amount of humrdity in the mois-
ture-sealed crisper.
1 The control can be adjusted to any setting be-
tween LO and HI
2. LO (open] lets moist ,-.
air out of crisper for
best storage of fruits
and vegetables
with skins.
3. HI (closed) keeps
moist arr in the cris-
per for best storage
of fresh leafy vege-
tables
Optional automatic ice maker. . .
nn
Lower Signal
L
Arm to Start It.
e Maker
If you have the automatic ice maker accessory or
plan to add one later [Part No. ECKMF-6). there are
a few things you wrll want to know
l
The ON /OFF lever
IS
a wire signal arm.
Down.. for making ice automatrcally,
Up.. to shut off the ice maker
l
Shake the bin occasronally to keep cubes sepa-
rated, and to obtarn Increased storage capacity.
l
It
IS
normal for Ice crescents to be attached by a
corner. They will break apart easily
l
You WIII hear water running when ice maker IS
working. You’ll hear Ice fall into the bin Don’t let
these sounds bother you.
l
The ice maker WIII not operate until the freezer is
cold enough to make ice. This can take overnight
l
Because of new plumbrng connections. the first
ice may be drscolored or off-flavored. Discard the
first few batches of ice.
l
If ice is not being made fast enough and more ice
IS needed, turn the Refrigerator Control toward a
higher number. Watt a day and, If necessary, turn
the Freezer Control toward A.
l
If you remove the ice bin, raise the signal arm to
shut off the ice maker. When you return the bin.
push It all the way in and lower the arm to the ON
position.
l
If cubes are stored too long, they may develop an
off-flavor .like stale water. Throw them away. They
WIII be replaced. Cubes In the ice bin can also
become smaller by evaporation.
Changing the light bulb.. .
Unplug the refrigerator first.
I. Reach behind-control console to find bulb
2. Remove bulb
3. Replace with opphonce bulb on/y
6