Filter
Top Products
Changing the control settings...
l
Adjust the Refrigerator Control first.
If you need to adjusttemperatures in refrigerator
l
Wait at least 24 hours between adjustments.
or freezer, use the settings listed in the chart below.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
If Refrigerator
Door opened often
Refrigerator
Section is
Large amount of food added
Freezer
TOO WARM
Room temperature too warm
If Freezer Door opened often
Refrigerator
Section is
Large amount of food added
Freezer
TOO WARM
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
Refrigerator
for your conditions
Freezer
QUESTIONS? If Refrigerator
call your
Section is
COOL-LINE’ TOO COLD
set-vice
assistance
If ICE isn’t
telephone
MADE FAST ENOUGH
number
(page 15).
If BOTH SECTIONS
are TOO WARM
Using your refrigerator
REFRIGERATOR
FREEZER CONTROL
Setting the controls...
Controls forthe
refriger
refrigerator. tihen the ref
the first time..
1. Set the REFRIGERA-
TOR CONTROL TO 4
2. Set the FREEZER
Give the refrigerator time to cool down com-
mal household refrigerator usage.
Refrigerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
Heavy ice usage
Very cold room temperature
(can’t cycle often enough]
Refrigerator
Freezer
Door opened often
Large amount of food added
Refrigerator
Freezer
Power Saving Control...
1. Use the “CONSUMES LESS ENERGY” setting when
The Power Saving Control on the Control Con-
humidity is low.
Sole Operdes
electric heaters around the door
openings. These heaters help keep moisture from
2. use the “REDUCES EXTERIOR MOISTURE” setting if
forming on the outside of the refrigerator.
moisture forms on the outside of the refrigerator.
Very warm or very cold
room temperatures
5