Filter
Top Products
Adjusting the refrigerator shelves...
To remove shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing and adjusting freezer shelf...
To remove the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf:
1. Remove shelf.
2. Remove supports by sliding upwards
3. Replace supports on desired level.
4. Replace shelf.
Removing crispers and crisper cover...
PULL OUT TO THE STOP, LlFl THE
FRONT AND PULL AGAIN.
To remove the crispers:
1. Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace in the reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
REMOVE THE
GLASS INSERT,
LlFl THE FRAME FRONT,
THEN THE BACK.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support
To replace the cover:
1. Replace metal cover support on wall supports
In front section of cabinet.
2. Fit back of corner into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
GLASS IS HEAVY.
BE CAREFUL.
Moving the meat drawer and cover...
PULL OUT TO THE STOP, LlFl THE
FRONT AND PULL AGAIN.
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
ASS IS HEAVY. 1. Tilt front of cover up, lift at back, and pull straight
out
2. Replace In reverse order.