Filter
Top Products
Using your refrigerator
REFRIGERATOR
POWER SAVING CONTROL
FREEZER
Refrigerator Control Freezer Control
Power Saving Control
Setting the controls.. .
Controls for the refrigerator and freezer are in the
Glve the refrigerator time to cool down com-
refrlgerotor. When the refrlgerotor Is plugged In for pletely before adding food.
(This may take sev-
the first time
era1 hours.)
1 Set the REFRIGERA-
RtmlGmATcm
TOR CONTROL to 3
__.. “,” 131 ,1>11>1”.
These settings should be about right for normal
household refrigerator usage.
2 Set the FREEZER
FREEZER
CONTROL to B
.-.,*,, [BI <011111.
The controls WIII be set about right when milk or
juice IS as cold as you llke and when Ice cream
Is firm
To adjust a control,
REFRIGERATOR
reach under the console
.“.s*/P 3 <<h”18.
and turn the knob.
+iik
Changing the control settings.. .
If you need to adjust temperatures in refrigerator
or freezer, use the settings llsted In the chart below.
l
Adjust the Refrigerator Control first
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control, If needed.
4
QUESTIONS
call your
COOL-LINE@
service
asslstance
telephone
number
CONDITION:
If Refrtgerator
Sectlon IS
TOO WARM
If Freezer
Secticn IS
TOO WARM
?
If Refrigerator
Sectlon
IS
TOO COLD
If ICE Isn’t
MADE FAST ENOUGH
Wge 15).
If BOTH SECTIONS
are TOO WARM
Power Saving Control.. .
The
Power Saving Control
on the Cc
sole operates electric heaters around
openings These heaters help keep mo1
fcfming on the outside of the refrtgerator
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold rmrn temperature
[can’t cycle often enough]
Controls not set correctly
for your condltlons
RECOMMENDED CONTROL
SETTINGS:
Refrigerator 4
Freezer C
Refrigerator
?
Freezer
A
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Heavy Ice usage
Very cold room temperature
(can’t cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
POWER SAVING CONTROL
jntrol Con-
the door 1 Use the “CONSUMES LESS ENERGY’ setting when
sture from
humidity IS low
2
Use the ‘REDUCES EXTERIOR MOISTURE setting
only if moisture forms or’ the outside sf the
refrigerator
5