Whirlpool ETl8PKXP Refrigerator User Manual


 
Changing the light bulb...
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigemtor at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
1 Reach behind control console to find bulb
2. Remove bulb.
3 Replace with a do-watt appliance bulb
Moving the meat pan and covet..
Glass is heavy.
Pullout to Stop.
lift the
Be Careful.
frame
Frame
supporl
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
Gloss shelves ore
heavy Be corefui.
Removing crispers and crisper cover...
Pull Out to Stop. Lift the Front
Remove the
Glass Insert,
Lift the Frame Front,
then the Back
Glass Is heavy.
Be Careful.
Removing the Meat Pan:
I, Slide the meat pan out to stop.
2. Lift the front.
3. Slide pan the rest of the way out.
4. Replace in reverse order.
Removlng the cover:
I, Push up glass insert from bottom, then slide out
with both hands.
2. Lifi cover frame out of frame support
3. Tilt front of frame support up, lift at back, and pull
support straight out.
4. Replace in reverse order.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. filt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the Crispers:
1. Slide crisper straight out to stop, Mt front, then slide
the rest of the way out.
2 Replace in the reverse order
Removing Cover:
1 Push up glass insert from bottom, then slide out
with both hands.
2 Lift front of cover frame and remove cover support
3 Lift out cover frame by pulling up and out
Redacina Cover:
iit back\f cover Into notch supports on walls of
refrigerator, then lower front into place.
Replace cover support with the long tab
towards the front.
Note:
If the support needs
adjustment. turn base right to lower, or lefi to raise.
Slide back of glass Insert into p!ace, then lower front
6