Filter
Top Products
Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page
19.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
REASON:
If Refrigerator
Door opened often
Section is
Large amount of food added
TOO WARM
Room temoerature too warm
RECOMMENDED
CONTROL SElTINGS:
Refrigerator 6
Freezer
D
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
If ICE isn’t
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Refrigerator
Freezer
ii
Refrigerator 2
Freezer
A
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer
i
Refrigerator
Freezer
:
Using the covered utility compartment
The utility compartment, at the top of the refrig-
erator door, is designed to hold most 1 -pound
soft spread containers, sticks of butter or
margarine, and other small, frequently-used
packages. Keeping small items, that are used on
a regular basis, in this location will save you time
and energy as you prepare snacks or meals.
Removing the drop-in door trim
The drop-in door trim can be removed for easier
cleaning.
To remove trim:
1. Remove all items from the shelf.
2. Pull straight up at each end of the trim.
To replace trim:
1. Line up each end of the trim above the trim
pocket opening in the door liner wall.
2. Push trim straight down until it stops.
3. Replace all items on the shelf.
8