Filter
Top Products
Removing the snap-on door trim
The snap-on door trim can be removed for easier
cleaning.
To remove trim:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of the
door trim.
3. Pull door trim straight out.
To replace trim:
1. Line up each end of the door trim with the
button on the door liner wall.
2. Push trim straight back until it snaps securely
into place.
3. Replace all items on the shelf.
Adjusting the shelf glide
The shelf glide can be used to secure odd-
shaped items or to separate other items.
To adjust the shelf glide:
1. Grasp glide.
2. Slide glide along track.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.