Filter
Top Products
The anti-tip bracket
l To reduce risk of range tipping over, secure range with
a
properly
installed anti-tip bracket supplied with range or an optional wall-
mounted anti-tip bracket kit.
l If range is moved for cleaning or service, check that anti-tip device
is engaged before using range.
Failure to follow the above precautions could result in personal injury.
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
To verify the anti-tip bracket is
engaged (if you have a floor
bracket):
l
Remove
the storage drawer. (See page 15.)
l
Look
to see if the anti-tip bracket is attached
to floor with screws.
l
Make sure
one rear leveling leg is positioned
Rear
leveling
leg
under the anti-tip bracket.
l See Installation Instructions for further details.
To verify the anti-tip bracket is
engaged (if you have a wall
bracket):
Floor bracket
l
Look
to see if the anti-tip bracket is attached
with screws to the wall behind the control
panel.
l
Make sure
the cable on the back of the range
is secured by the two hooks on the bracket.
l
Cable
must be unhooked from wall bracket to
move range for cleaning or service. Recon-
nect cable before using range.
l See Installation Instructions for further details.
Cable
kzz
control
panel)
Wall bracket
16