Filter
Top Products
5. Before putting the burners back, dry them
thoroughly by setting them in a warm oven for
30 minutes.
6. Replace burners, making sure they are
properly seated and level. Replace screws.
7. Occasionally check the burner flames for
proper size and shape as shown. A good
flame is blue in color. If flames lift off ports, are
yellow, or are noisy when turned off, you may
need to clean the burners (see page 17), or
call a qualified technician for adjustment.
Typical surface burner flame
at highest setting
Removing the oven door
Removing the oven door will help make it easier
to clean the oven.
Burn and Electrical Shock Hazard
Make sure all controls are OFF and the
oven is cool before removing oven door.
Failure to do so can result in burns or
electrical shock.
To remove:
1. Open the door as far as i-t will go.
2. Remove the screws on each side of the oven
door.
3. Close the door about % of the way.
4. Lift the door up and off the hinges.
18