Filter
Top Products
18
F
BAKE
(example for bake at 375°F)
PRESS YOU SEE
TEMP
Your oven is designed with the ACCUBAKE
®
temperature management system to constantly
monitor oven temperature. The bake element
will cycle, as needed, to maintain the desired tem-
perature. This feature is automatically
activated when the oven is in operation.
1. Place the racks where you need them in the oven.
For more information, see “Positioning racks”
under “Using the oven” earlier in this section.
2. Choose the bake setting (optional).
3. Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press ▲ to raise the
temperature or ▼ to lower the temperature in
5°F amounts. Use these pads until the desired
temperature shows on the small display.
USING YOUR RANGE
Front of rack
Rear of rack
PRESS YOU SEE
BAKE
F
BAKE
TONES
Tones tell you if a function is entered correctly or
not. They also tell you when a cycle is completed.
To shut off all tones except for the end-of-timer
and error tones:
Press and hold STOP TIME for 5 seconds.
A short tone will sound to tell you the
tones have been changed. Repeat to turn
the tones back on. You will see “oFF” for
3 seconds when the tones are turned off
and “on” for 3 seconds when they are
turned on.
To choose between high and low volume tones:
Press and hold DELAY START TIME for 5 seconds. A
short tone will sound to tell you the tones
have been changed. Either “HI” or “LO” will
appear on the time display for 3 seconds to
show the volume you chose.
DELAY
START
TIME
STOP
TIME
BAKING/ROASTING