Filter
Top Products
To delay the start using delay start time:
1. Press AUTO CLEAN.
This will automatically set a 3
1
⁄2 hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄2 hour before the cycle is over.
31
NOTE: Make sure the clock is set to the correct
time of day. (See “Setting the clock” in the “Using
Your Range” section.)
To start cleaning immediately:
1. Press AUTO CLEAN.
This will automatically set a 3
1
⁄2-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄2 hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
⁄2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
⁄2-4
1
⁄2 hours shows on the display.
•
Use 2
1
⁄2 hours for light soil.
•
Use 3
1
⁄2-4
1
⁄2 hours for average to heavy soil.
3. Start the oven.
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. Press
the door closed if needed. If the door is closed, it
will lock as soon as you press START/ENTER.
4. After the Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
5. After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
SETTING THE CONTROLS
USING THE SELF-CLEANING CYCLE
AUTO
CLEAN
CLEAN
TIME
PRESS YOU SEE
PRESS YOU SEE
HR MIN
CLEAN
TIME
(example shows 4
1
⁄2-hour
cleaning time)
PRESS YOU SEE
START
ENTER
5 SEC
O
N
HEAT
DTIME
CLEAN
TIME
LOCKED
CLEAN
YOU SEE
continued on next page
PRESS YOU SEE
AUTO
CLEAN
CLEAN
TIME