Whirlpool GS395LEG Range User Manual


 
OFF/CANCEL will cancel any function except the
clock, timer, or control lock. When you
press OFF/CANCEL, the display will show
the time of day or, if the minute timer is
also being used, the time remaining.
12
USING YOUR RANGE
TONES
Tones tell you if a function is entered correctly or
not. They also tell you when a cycle is completed.
To shut off all tones except the end-of-timer and
error tones:
Press and hold STOP TIME for 5 seconds. A short
tone will sound to tell you the tones have
been changed. Repeat to turn the tones
back on. You will see “oFF” for 3 seconds
when the tones are turned off and “on” for
3 seconds when they are turned on.
To choose between high and low volume tones:
Press and hold DELAY START TIME for 5 seconds.
A short tone will sound to tell you the tones
have been changed. Either “HI” or “LO” will
appear on the time display for 3 seconds to
show the volume you chose.
DELAY
START
TIME
STOP
TIME
USING THE ELECTRONIC MINUTE TIMER (CONT.)
YOU SEE
RTIME
PRESS YOU SEE
TIMER
OFF
(time of day)
PRESS YOU SEE
TIMER
OFF
(time of day)
After setting a function, you must press START/
ENTER to start the function. If you do not
press START/ENTER within 5 seconds of
setting, “START?” will show on the
display as a reminder.
STARTING/CANCELING A FUNCTION
START
ENTER
5 SEC
OFF
CANCEL
When the time is up:
You will hear four 1-second tones, then four
1-second reminder tones every minute until you
press the timer off pad.
NOTE: To remove the reminder tones, press and
hold TIMER SET for 5 seconds. To bring back
the tones, follow the same step. You will see
“OFF” when the tones are turned off and “on”
when they are turned on.
4. Turn off the minute timer.
To cancel the minute timer:
Press TIMER OFF.