Whirlpool I-43 Dishwasher User Manual


 
To change door
panel color.
CAUTlON: Use care in changing
panel. Cut metal edges may cause
personal injury or damage to color
panels.
Remove
Iwo screws securing one
of
the side trim pieces, Slide trim down-
ward until upper edge is free of console
or end cap. Lift off trim piece.
PoeN~o 3367223 Reb 1
2.
Slide out color panels and corru-
gated spacer. Select panel you wish to
l-jaw3 showing and place on $0~ of
panels. Slide color panels and spacer
back into place.
Slide desired color panel
into?he
lowa door trim and the groove on the
underside of console. Gently push on
panel surface to fit panel under side
trim edge.
4
m
Slide trim piece against the console
or end cup. Align side trim and mount-
ing holes in door frame. Secure trim to
door with screws.
TKirlpuol
b CORPORATION
If the dishwasher
is not operating
properly.. .
Check these points:
m Is the door closed tightly and latched
securely?
l
Has the cycle been set correctly to
start the dishwasher?
* Is the water turned on?
l
Has a house fuse blown?
0 Has electrical power been
interrupted?
Note: If the motor has stopped because
of overload, it will automatically reset
itself within a few minutes. If after
checking these points the dishwasher
still does not run or complete a cycle,
contact the cashier at your local
exchange for service information.
If
you
are
transferred to the
United States,
and...
your Whirlpool portable dishwasher
requires service: Contact an authorized
Whirlpool dealer or service technician
and provide them with proof of the
purchase date of your portable
dishwasher. Service within the warranty
period will be supplied at
no charge.
If you have any questions about
operating or maintaining your Whirlpool
portable dishwasher that are not
covered in the Insta!lation Instructions or
Use and Care Guide, call the Whirlpool
COOL-LINE? Dial just as you normally
dial long distance (800) 25%43Ol -the
call is free.
Pmted In US A