Filter
Top Products
Charcoal filter accessory:
Your microwave oven does not come
equipped with a charcoal filter. if your
microwave hood combination is being used
to recirculate air, we recommend that you
install the charcoal filter accessory. Replace-
ment charcoal filters are available from your
authorized Roper service company, Par-l
No. 4359416, or by calling the Consumer
Assistance Center at l-800-447-6737. You
cannot clean the charcoal filter and should
replace it every 6-l 2 months.
- -
1. Remove
the vent cover mounting screws.
2. Tip
the cover forward, then
lift out to
remove.
3. if you need to remove an existing
charcoal filter,
lift the back of the
charcoal filter. Slide the filter straight out.
If you are installing a filter for the first time
go to Step 4.
4. Slide a
new charcoal filter into place. The
filter should rest at the angle shown.
5. Slide
the bottom of the vent cover into
place.
Push
the top until it snaps into
place.
Replace
the mounting screws.
After replacing filters:
l Plug in power cord or turn on power
supply.
_--
38