Filter
Top Products
PROBLEM POSSIBLE CAUSE
SOLUTION
Microwave
The electric supply to your
Your electric company can tell you if
cooking times
home or wall outlets is low or
the line voltage is low. Your electrician
seem too long
lower than normal. or service technician can tell you if the
outlet voltage is low.
The Cook Power is not at the
Check “Microwave cooking chart” on
recommended setting. page 51.
There is not enough cooking
Allow for more time when cooking more
time for the amount of food food at one time.
being cooked.
The Display
The oven door is not closed
Completely close oven door.
shows a time
completely.
counting down
but the oven is
You have set the controls as a Touch TIMER OFF to cancel the
not cooking
Minute Timer.
Minute Timer.
You do not hear
The command is not correct.
Re-enter command.
the Program-
ming Tone
The microwave
Probe is not pushed far
Insert at least % of probe into the food.
oven turns off
enough into the food.
too soon or not
soonenough
Probe is not positioned
Position probe tip in the center of
when using the
correctly in the food. the food.
Temperature
When cooking roasts, you
Allow roast to stand for a few minutes
Probe
have not let roast stand after
after cooking.
cooking.
Probe is not plugged in
Plug probe tightly into its socket.
correctly.
Cook Power is not set Reset the Cook Power.
correctly.
Probe temperature is not set
Reset the probe temperature.
correctly.
The Display
There has been a power Reset the clock.
shows
“888:88” interruption.
56